Jump to content

Contact Us

West of I-95 in Virginia: Joe Polito - joe@vaheat.com (804-350-8829)
            
East of I-95 in Virginia, Maryland and DC: Chris Haslego - chris@vaheat.com (804-370-3855)

Solids Handling


Cyclone Collectors


Cyclone units are used for mechanical separation of granular type products. Young Industries'' standard sizes include 10" thru 78" diameter providing capacities from 115 to 15,000 CFM for both vacuum and pressure service.Units are typically fabricated...

Read story →    0 comments    -----

Mixers and Blenders


Units used to blend solids to solids, solids to liquids and light paste materials. Units designed to handle batch capacities from 5 cu. ft. to 1,500 cu. ft. and constructed of carbon steel, stainless steel or other special alloys.Units are custom desig...

Read story →    0 comments    -----

Mixers and Blenders


Young Industries, Inc. is a value-engineered based manufacturer of bulk materials handling equipment. Our goal is to supply bulk materials handling products, services and replacement parts that are safe, trouble-free to install, simple to maintain, and...

Read story →    0 comments    -----


Diverter Valves


Young Industries has been providing equipment with the lowest overall cost of ownership as compared with equipment having low initial cost.Starting with the standard features and follow by the application proven designs and models, Young Industries, In...

Read story →    0 comments    -----

2 Phase Decanter Separator


P2 decanter centrifuges are specifically designed to separate sludge or slurries into a solid phase and one or two liquid phases, for the chemical and pulp and paper industries.Separation takes place in a horizontal cylindrical bowl equipped with a scr...

Read story →    0 comments    -----


Separators


In a centrifugal separator, the gravity that causes separation in traditional settling tanks is replaced with a centrifugal force that can be more than 5,000 times stronger. Naturally, this makes separation much faster and more efficient.If buffer plat...

Read story →    0 comments    -----

Emmie - Centrifugal Cleaning of Oils


In a centrifugal separator, the gravity that causes separation in traditional settling tanks is replaced with a centrifugal force that can be more than 5,000 times stronger. Naturally, this makes separation significantly faster and more efficient.If bu...

Read story →    0 comments    -----


Bag Dump Stations


Available in three (3) standard sizes with openings of 45", 32" and 24" for handling various sizes and quantities of bag material.
Materials of construction include stainless steel and carbon steel construction with special coatings as required. U...

Read story →    0 comments    -----

Rotary Valves


Rotary Valves

The Class 300 rotary valve is designed for either high temperature or high pressure process requirements when feeding of Bulk Materials
The Young Industries "Class 300 and Class 150 Drop-Thru Rotary Valves" are for high...

Read story →    0 comments    -----


Alfie Coolant Cleaning


Alfie centrifugal separators remove the contaminating oil, grease and solid particles from coolants used in industry, helping prevent tool wear and avoid disposal problems.

Coolants are a major expense throughout metalworking industry, and...

Read story →    0 comments    -----