Jump to content

Contact Us

West of I-95 in Virginia: Joe Polito - joe@vaheat.com (804-350-8829)
            
East of I-95 in Virginia, Maryland and DC: Chris Haslego - chris@vaheat.com (804-370-3855)

- - - - -

Condensers


AlfaCond plate condenser

The AlfaCond is designed specifically for vacuum condensation. The large vapour inlet connection is placed centrally at the top and the smaller condensate outlets on each side at the bottom. The two medium-sized connections for cooling media are located in the middle of the unit.

AlfaCond uses the cassette concept, with the plates welded in pairs. The vapour is condensed in the welded channel, while the cooling water passes through the corresponding gasketed channel. The plate pattern is designed to ensure the most effective condensation possible, using an asymmetric channel configuration with a large gap on the vapour side and a small gap on the cooling water side.

The result is a very low pressure drop on the vapour side and greater velocity and turbulence on the cooling water side. Together, these maximize heat transfer efficiency and minimize fouling.

Questions on your current heat exchanger setup?
or
Need help designing a new unit to fit your needs?

Application Datasheet




0 Comments