Jump to content

Contact Us

West of I-95 in Virginia: Joe Polito - joe@vaheat.com (804-350-8829)
            
East of I-95 in Virginia, Maryland and DC: Chris Haslego - chris@vaheat.com (804-370-3855)

Technical Articles


Series 1000


150 SCFM to 600 SCFM
Industrial Duty - Dry desiccant dehumidifier Series 1000 units are self contained, with all necessary blowers, controls, filters and drive components to assure the safe and automatic operation of the dehumidifier.Single point...

Read story →    0 comments    -----

Sanitary Packages


Pick Pre-Packaged Sanitary Heater Systems are designed to efficiently meet food and pharmaceutical industry processing needs, from pilot scale laboratory units to production scale packages. Pilot Scale For laboratories or pilot operations, Picks pilot...

Read story →    0 comments    -----

Horizontal Coil


A very high efficiency thermal fluid heater. The heater has two helical coils, a smaller coil that fits inside of a larger coil. Hot burner gases pass through the center of the smaller coil and double back between it and the larger coil. They then trav...

Read story →    0 comments    -----


Constant Flow Specs


Heaters are readily available with cast iron, carbon steel, or 316SS materials upon request. Water and steam piping is available in threaded or flanged construction.


Cast Iron Heaters
Approx. 3" dia. is threaded.
Approx. 4"...

Read story →    0 comments    -----

Heat Exchanger


A heat exchanger is a piece of equipment that continually transfers heat from one medium to another in order to carry process energy. There are two main types of heat exchangers.
Direct heat exchanger, where both media between which heat is exchan...

Read story →    0 comments    -----


Gasketed PHE


The gasketed plate heat exchanger consists of a series of thin corrugated plates fitted with gaskets. The plates are then compressed together in a rigid frame to create an arrangement of parallel flow channels. The two fluids flow in alternate channels...

Read story →    0 comments    -----

Plate Exchanger Cold Leakage


Your plate heat exchanger was working just fine. You open it up to perform an annual cleaning, tighten it to the proper dimension, and upon start up, it begins to leak. What just happened? Figure 1: Graphical
Depiction of Cold
LeakageThe an...

Read story →    0 comments    -----


Cooling Tower Servicing


Serving the mid-Atlantic region, Virginia Heat Transfer cooling tower and plate heat exchanger cleaning services is ready to help you keep your cooling system running efficiently. Keeping your cooling tower system clean and efficient is key to minimizi...

Read story →    0 comments    -----

External Leakage


Plate heat exchangers can supply reliable operating service for years with proper maintenance, but what about when something goes wrong? Is your plate heat exchanger leaking? Is the leak slow or fast? How can you know what the problem is and the best w...

Read story →    0 comments    ***--


PHE Frame Corrosion


Corrosion under the connection liners in plate heat exchangers can cause significant problems. The key is to learn how the corrosion happens so that costly frame replacements can be avoided.Figure 1: Leakage next to
the frame plate may be a
Read story →    0 comments    -----